Loading... Please wait...
  • Image 1

SpeedTrace Extreme Pipe & Valve Kit: 12 ft long, 120V


Product Description

Ready-to-Install Kit: SpeedTrace Extreme, FFSL81-12, 12 ft long, 120V with PSAT36A Adhesive Tape, 2-Pieces INSUL-LOCK® Insulation, a roll of Duck® Duckling Duct Tape, and  a Thermo Cube controlled outlet.


-1 -SpeedTrace Extreme FFSL81-12, 12 ft, 120V, Pre-assembled with standard 3-prong (NEMA 5-15) plug 

-1 Roll of PSAT36A Adhesive Tape to secure the heating cable

-2 6ft Pieces of INSUL-LOCK® Insulation to insulate and protect the heating cable

-1 Roll of 282309 Duck® Duckling Duct Tape: 0.5in x 180in (19mm x 4,5M)

-1 THERMO-CUBE: TC-3 Thermo Cube, Thermostatically Controlled Outlet. Turns power on when air temperature reaches approximately 35°F (2°C) and turns power off at 45°F (7°C).

*NOTE: SpeedTrace Extreme Ready-to-Install Kits are available for 1/2" and 3/4" Pipes. For Insulation Options for Other Pipe Sizes, Please See the Accessories Page.*

SpeedTrace Extreme


•Built for heating in extreme cold conditions down to: -40°F (-40°C) 

•Durable industrial grade

•60% more wattage than typical heating cable

•Ideal for freeze protection and thawing: metal or plastic pipes and valves. Can also be used on small tanks and vessels.

•Indoor or outdoor use

•Grounded for safety

•Easy-to-install: pre-assembled with power cord and plug

•Safe to overlap, spiral wrap, or loosely install

•Automatically adjusts heat output based on surface and ambient temperature

•No temperature controller is required



•Supply voltage: 110-120VAC

•8 watts/ft (26 watts/m) at 50°F (10°C)

•12.8 watts/ft (42 watts/m) at 32°F (0°C)

•Maximum exposure temperature: 150°F (65°C) 

•Moisture and flame resistant thermoplastic elastomer outer jacket 16 AWG bus wires

•Pre-terminated 30” (76cm) long power cord with standard 3-prong (NEMA-5-15) plug

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

4.00 LBS
Calculated at checkout