Loading... Please wait...
  • Image 1
  • Image 2
  • Image 3

100 FT- SpeedTrace Roof & Gutter Kit


Product Description

Product Highlights

  • Professional Grade Heating Cable - Suitable for residential, commercial and industrial applications.
  • Self-Regulating Heating Design - Automatically adjusts heat output based on surface and ambient temperature so no temperature controller is required
  • Ready-to-install Kits - Complete with heating cable, roof clips, downspout hangers and cable ties needed to install your de-icing system.
  • Prevent Ice-Dams - Ideal for preventing hazardous snow and ice build-up on roofs, gutters and downspouts that can cause property damage and personal injury.
  • Easy Installation - Pre-Assembled 3-prong plug with ground for safety and easy installation.
  • Reliable Performance - Engineered for use in extreme cold conditions, even as low as -40°F (-40°C).
  • Durable Construction - Moisture & UV resistant thermoplastic elastomer outer jacket provides long dependable service life in harsh conditions.

Kits include:

  • Pre-Assembled SpeedTrace Roof & Gutter Heating Cable
  • Heavy Duty Roof Clips
  • Downspout Hanger Brackets
  • UV Resistant Cable Ties

 Required items for installation (not supplied):

  • UV Resistant Silicone/RTV Roof Sealant
  • Roof Nails or Screws (not necessary for some roof types)


Additional items required, but not supplied:

  • RTV Sealant for Metal Roofs
  • Nails or Screws for Shake or Shingle Roofs



  • Supply voltage: 110-120VAC
  • 5 watts/ft (16 watts/m) at 50°F (10°C)
  • 8 watts/ft (26 watts/m) at 32°F (0°C)
  • Maximum exposure temperature: 150°F (65°C) 
  • Minimum exposure temperature:  -40°F (-40°C) 
  • Moisture and flame resistant thermoplastic elastomer outer jacket 
  • 16 AWG bus wires
  • Pre-terminated 30” (76cm) long power cord with standard 3-prong (NEMA-5-15) plug


Roof & Gutter Requirements
Suitable For: 
  • Standard pitched roofs with or without gutters
  • Standard roofing materials including shingle, shake, rubber, tar, wood, metal and plastic roofs
  • Gutters made from standard materials including metal and plastic
  • Downspouts made from standard materials including metal and plastic
Not Suitable For:
  • Flat roofs
  • Slate, stone, ceramic, composite (tar and gravel) roofs
Electrical Requirements
SpeedTrace Roof and Gutter Kits require a GFCI 120 VAC outlet that is close to the cable starting point on the roof and protected from the weather. 
Use of an extension cord is not recommended, but if an extension cord is needed, call your local electrical inspection agency for a recommendation on the proper outdoor-safe extension cable. 


Roof & Gutter De-Icing Cable Selection
Use the equation and table below to calculate the heating cable length required:
Roof edge length (ft) x (feet of heating cable per foot of roof edge in table)
+ Total gutter length (ft)
+ Total downspout length (ft) +1 ft
Total Heating Cable Length Required (If less than the SpeedTrace Roof and Gutter Kit lengths, round up to the nearest cable size.)



Ordering Information: Kit Contents


Warranty Information


Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

20.00 LBS
Calculated at checkout